What is Monocrystalline photovoltaic solar power panel?
Monocrystalline PV panels are made from a single piece of silicon, therefore making it easier for electricity to flow through. They have a pyramid cell pattern which offers a larger surface area enabling monocrystalline PV panels to collect a greater amount of energy from the sun's rays.
|Maximum Power Pmax(W)||490||495||500||505||510||515|
|Maximum Power Voltage(Vmp/V)||38.30||38.50||38.70||38.90||39.10||39.30|
|Maximum Power Current(Imp/A)||12.80||12.86||12.91||12.97||13.04||13.10|
|Open Circuit Voltage(Voc/V)||45.40||45.60||45.80||46.00||46.20||46.40|
|Short Circuit Current(Isc/A)||13.60||13.66||13.72||13.78||13.84||13.90|
|Temperature Coefficient of Isc(alsc)||+0.05%/ ºC|
|Temperature Coefficient of Voc(βVoc)||-0.31%/ ºC|
|Temperature Coefficient of Pmax(γPmp)||-0.35%/ ºC|
|STC||Irrdiance 1000W/m2, Cell Temperature 25ºC, Air Mass 1.5|
> High-efficiency MBB PV cell
> Uniform color
> Germany standard Cell
> Full test
> Antireflective glass> Translucency of normal luminance is increased 2%
> Module efficiency is increased 2%
> Self-clean function
> Service life 25 years
> Silvery and black
> thickness 30/35/40
> stress test.
>Conventional standalone edition and engineering custom edition
> Quality diode ensures module running safety
> IP67 protection level
> Heat dissipation
> Long service life
Our factory is located in Hefei City Anhui Province.
There are about 1000 workers in our company.
We establish efficient production team for provide our clients good experience.
Our factory is a key investment attraction project of the government. It is mainly engaged in the research and development, production and sales of solar cell modulesand the investmentconstruction and operation of solar distributed power plants, with a total investment of 2.36 billion yuan. The company has reached a lona-term strategic partnership with well-known domestic listed companies such as Trina Solar, New Hualian Intelligent Photovoltaic, Jinko Solar, etc., to jointly develop high-efficiency modules with new processes such as half-cell film, and concentrator.
Since its establishment, the company has adhered to the development strategy of model innovation, structural adjustment, market operation, and cultural support, closely focusing on the improvement of the technological equipment level and industrial upgrading of new energy-led industries, realizing the deep integration of enterprise industrialization and informatization, and continuously strengthening the enterprise. Innovative development and sustainable development capabilties, and basically build into an intelligent, automated, diaital and clean modern enterprise with comprehensive competitiveness.
A solar panel's first line of defence against the harsh environment is the packaging. A typical solar panel packaging consists of a cardboard box with the footprint of a pallet and houses between 26 to 36 panels in the box. A good solar panel packaging design makes it easier to transport solar panels on a pallet, and provide excellent protection to the panels during transport.
Offers professional consulting services, professional knowledge of PV power plant and charging station solutions, and full life cycle O&M capabilities.
How Do Solar Panels Work?
Solar panels collect clean renewable energy in the form of sunlight and convert that light into electricity which can then be used to provide power for electrical loads. Solar panels are comprised of several individual solar cells which are themselves composed of layers of silicon, phosphorous (which provides the negative charge), and boron (which provides the positive charge). Solar panels absorb the photons and in doing so initiate an electric current. The resulting energy generated from photons striking the surface of the solar panel allows electrons to be knocked out of their atomic orbits and released into the electric field generated by the solar cells which then pull these free electrons into a directional current. This entire process is known as the Photovoltaic Effect. An average home has more than enough roof area for the necessary number of solar panels to produce enough solar electricrity to supply all of its power needs excess electricity generated goes onto the main power grid, paying off in electricity use at night.
In a well-balanced grid-connected configuration, a solar array generates power during the day that is then used in the home at night. Net metering programs allow solar generator owners to get paid if their system produces more power than what is needed in the home. In off-grid solar applications, a battery bank, charge controller, and in most cases, an inverter are necessary components. The solar array sends direct current (DC) electricity through the charge controller to the battery bank. The power is then drawn from the battery bank to the inverter, which converts the DC current into alternating current (AC) that can be used for non-DC appliances. Assisted by an inverter, solar panel arrays can be sized to meet the most demanding electrical load requirements. The AC current can be used to power loads in homes or commercial buildings, recreational vehicles and boats, remote cabins, cottages, or homes, remote traffic controls, telecommunications equipment, oil and gas flow monitoring, RTU, SCADA, and much more.
Solar thermal power plant
A solar thermal plant is a facility designed for converting solar energy into electricity through a conventional thermodynamic cycle. However, unlike thermal power plants that work by using fossil fuels, solar thermal power plants use a completely eco-friendly energy source like sunlight. The technology used to produce electricity is slightly different depending on the type of solar thermal plant we're talking about, but its operating system is similar.
A solar thermal power plant concentrates the solar radiation to heat a fluid with thermally conductive properties and raise its temperature until it's converted into steam. It's then fed to a turbine. Here, the thermal energy is converted into mechanical energy, which is transmitted to an alternator where its final transformation into electricity takes place. Once the thermodynamic cycle has been completed, the steam is returned to a condenser where it recovers its liquid state and the process is repeated again.
From an efficiency point of view, it's important to take into account that the performance of a solar thermal plant depends on the hours of sunshine and weather conditions. Therefore, these power plants also have a storage tank that allows the energy obtained to be stored to use it when necessary.
The company has a dynamic and innovative R&D team that continuously launches new products and technologies to meet customer demand for solar products. Our production processes strictly adhere to the ISO 9001 quality management system to ensure product quality and stability. Additionally, our products have obtained relevant certifications such as German TUV, CE, etc.
Q2: What kind of Solar Cells we have? Q3: What is your monthly capacity? Q4: Can you do the design for us? Q5:What is the warranty period, how many years? Q6: What is your terms of delivery? Q7: How is your technical support? Q8: Can I visit your company and factory in China?
Q1: Are you manufacturer?
A: Yes, we are professional brand manufacturer with many years experience.
A:Mono solar cell, such as 166*166mm, 182*182mm, 210*210mm.
A:Monthly capacity is about 200MW.
A: Yes. We have a professional designing team provide free desing for you, just tell us your ideas and we will help to carry out your ideas into perfect products. It is also ok if you do not have the complete files. Send us high resolution images, we can design the layout you want,until you are satisfied.
A: 15years product warranty, 25years 80% power output warranty for monofacial solar panel, 25years 80% power output warranty for bifacial solar panel.
A: We accept EXW, FOB, CIF, . You can choose the one which is the most convenient or cost effective for you.
Answer 5: We provide lifetime online support through Whatsapp/ Skype/ Wechat/ Email. Any problem after delivery, we will offer you video call anytime, our engineer will also go to oversea help our customers if necessary.
A: Sure. We are happy to receive you and show you around our workplaces.
Q2: What kind of Solar Cells we have?
Q3: What is your monthly capacity?
Q4: Can you do the design for us?
Q5:What is the warranty period, how many years?
Q6: What is your terms of delivery?
Q7: How is your technical support?
Q8: Can I visit your company and factory in China?